running wires

[B19 LBP]

im going to be starting my install this weekend :D :D

what i wanted to know is, whats the best way to run the speaker wires to the front door speakers,

ie : from the inside the car to inside the doors

many thanks

[BigFas]

when you open the door, you'll see a rubber grommet, this passes all cables from the cabin into the door. Just pull this out and feed the wires through.

[B19 LBP]

when you open the door, you'll see a rubber grommet, this passes all cables from the cabin into the door. Just pull this out and feed the wires through.

thanks for that fas:D :D

i though it might be that but just want to check to make sure there wasnt another way ;)

[BigFas]

just be careful, there's not a lot of space in there, so if you're planning on putting in some nice fat acoustically friendly cabling, it could scupper your plans. If you've got time and patience, trace the original wiring from the speakers and just cut it out. It'll free up a few mm, but bearing in mind the original wires aren't actually that big, it won't free up THAT much.