Wheel Choice

[BeemerBoy888]

Hi Guys,

Thinking of changing my MV's for a set of Breyton Spirit Stainless steel lips, opinions/suggestions guys on what you think of these (will go onto a black 330sport vert [ok ) or any views on other wheels? Stick to 18's or go for 19's?

Cheers :cool:

[444bhp Ray]

Hi Guys,

Thinking of changing my MV's for a set of Breyton Spirit Stainless steel lips, opinions/suggestions guys on what you think of these (will go onto a black 330sport vert [ok ) or any views on other wheels? Stick to 18's or go for 19's?

Cheers :cool:

think 19"s always look [cool some people think 18"s drive better i have had 18"s on my first bm then put 19"on it did drive great, got 19" on my M3 still great did need new tyre after a while it started to pick up the ruts in the roads put on new tyres drives sweet again had laser line tracking done £95 a place in Maldon Essex (Supa Tyres) is the name of the place great guys always very helpful nice wheels for sale to can do a good price as well i think
looking at putting some OZ Superleggera 111 forged 19" or Leonardo 111 19"
also if iforged are doing a deal till 5 jan like them to :confused:

[James325]

iForged aint got no Group buys on at the minute... reason i know is thats were my next set of wheels are ordered from for my M3.. as for wheel choice bimmer it depends on what type of wheel you are looking for like Ray said if you want the forged 2/3 piece then IMO you wont go far wrong with iforged HRE Oz but if you are looking at a nice 1piece wheel look no further than the BBS CH in 19"as for stepping upto 19s dont let no one tell you the ride is shit because it isnt i upgraded to 19" HREs on my vert and dropped it on eibachs and the ride quality was exellent and the look was even better, compared to the 18"

Go for 19s you wont regret it ;)

[444bhp Ray]

iForged aint got no Group buys on at the minute... reason i know is thats were my next set of wheels are ordered from for my M3.. as for wheel choice bimmer it depends on what type of wheel you are looking for like Ray said if you want the forged 2/3 piece then IMO you wont go far wrong with iforged HRE Oz but if you are looking at a nice 1piece wheel look no further than the BBS CH in 19"as for stepping upto 19s dont let no one tell you the ride is shit because it isnt i upgraded to 19" HREs on my vert and dropped it on eibachs and the ride quality was exellent and the look was even better, compared to the 18"

Go for 19s you wont regret it ;)

My friend hate to say this but they have a group sale on the group sale is with another group called M3 Forum i emailed them two days back a sorted out the size i wanted & the price the price is good the group buy is until the 5 Jan 05

[Durgesh]

I looking to order a set of iforged soon, ray what was deal they were offering? And what are the details....

Durgesh

[444bhp Ray]

I looking to order a set of iforged soon, ray what was deal they were offering? And what are the details....

Durgesh

Hi mate hope this helps all there wheels are in the sale iForged End Of The Year Groupbuy Only A FEW DAYS

--------------------------------------------------------------------------------

With the success of the first groupbuy, we are offering a last minute end of the year groupbuy on all iforged wheels. This groupbuy will be valid until January 5th. The new emotion wheel will be included for this groupbuy. This will be the last groupbuy for the year, so DON'T MISS OUT.

To place an order, please email us at info@iforged.com. Order form is located at www.iforged.com/fitment.pdf and fax it to 714-242-9071


EMOTION 3PC.


CLASSIC 3PC.


EQUIP 2PC NO RIVETS

The best method of contact is via email, AIM or telephone

Visa, Mastercard, or Bank Check are accepted
Please note that clearcoat options include iForged's new ceramic clearcoat, which is more durable and scratch resistant. The wheels ordered in this group buy will be among the first to receive this new treatment.

For reference, 2pc and 3pc look identical when you order the 2pc with rivets. For those that prefer the cleaner, "boltless" look, simply order the 2pc non-rivet.

You can contact us at 714-484-1070 ext.111, or email us at info@iforged.com

Example:

Production Times:
Silver, Black, Gunmetal, Hi-Polished - 4-6weeks
Brushed Aluminum, Chrome - 6-8weeks

Thank you in advance for you business,

2 PC.

18x8, 18x9, 18x10"

non rivet - $2085
with rivets - $2225

19x8, 19x10"

non rivet - $2285
with rivets - $2425

20x8.5, 20x10"

non rivet - $2485
rivets - $2625

22x8.5, 22x10"

non rivet - $2965
with rivets - $3105

OPTIONS

Standard Finishes: Hi-Polished, Imagine Silver, Black, Graphite

Brushed aluminum with ceramic clearcoat
$150 dollars per wheel

Polished with ceramic clearcoat $135 dollars per wheel


3 PC. - 10.5" widths availible for an additional charge

18x8 up to 18x10"
$2475

19x8 up to 19x10" widths
$2710

20x8 up to 20x10" widths
$2915


OPTIONS

Standard Finishes: Hi-Polished, Imagine Silver, Glossy Black, Anthracite, Hyper Black, Hyper Anthracite

Brushed aluminum with ceramic clear [center only]
$100 dollars a wheel

Chrome [center only]
$100 dollars per wheel

Polished with ceramic clearcoat [center only]
$135 dollars a wheel

You can choose any style in our FS series as well

__________________


--------------------------------------------------------------------------------
Last edited by iforged : 12-29-2004 at 12:54 AM. Reason: change title

iforged
View Public Profile
Send a private message to iforged
Find More Posts by iforged
Add iforged to Your Buddy List
Add member to your Ignore List
View Member Gallery

12-29-2004, 01:37 AM #2
ROCKV7
Registered User




Join Date: Oct 2004
Location: Bloomingdale, Illinois
Posts: 182

[ok Ray

[James325]

Ray by looking at that they are only offering 3 types of wheel
EMOTION 3PC.
CLASSIC 3PC.
EQUIP 2PC NO RIVETS
and when i ordered mine the twat never told me he was going to be doing a group buy :mad:

[444bhp Ray]

Ray by looking at that they are only offering 3 types of wheel
EMOTION 3PC.
CLASSIC 3PC.
EQUIP 2PC NO RIVETS
and when i ordered mine the twat never told me he was going to be doing a group buy :mad:

No james i tried to down load all the wheels but no luck they told me and the M3 site this is to all their wheels i think the prices i have shown are a example
hope this helps boys [ok not 100% sure about what wheels but 2pc &3pc yes can't see why they wont do 1pc [ok

[BeemerBoy888]

Any pics guys? [cool

[James325]

What ye gone for Ray? ;)

[churchwa]

Durgs,

All i can say is that i hope you are not going to pussy out and go with 19's.

It is 20's all the way.

http://www.iforged.com/albums/album02/dubs2.jpg
http://www.iforged.com/albums/album02/dubs1.jpg

[444bhp Ray]

What ye gone for Ray? ;)

Not sure yet but size if i do will be 8.5x19 & 10.5x19 just not sure yet i love HRE wheels but think too much money,how about you what you got? [situp

[James325]

ive got 9x19F 10.5x19R 2"lip Front 4"lip Rear Adonized Black Sprints! i had HRE 441 on my old vert though! and im dropped on kw coils! Vince advised me against 20" unless i was going for show? [read

[444bhp Ray]

ive got 9x19F 10.5x19R 2"lip Front 4"lip Rear Adonized Black Sprints! i had HRE 441 on my old vert though! and im dropped on kw coils! Vince advised me against 20" unless i was going for show? [read

i want to go for 8.5x19f 10.5x19r reading some post on M3 Forum.com & some boys was on about rubbing with my tyres 285x30x19 rear now thinking 10" on the rear would like 10.5" [ok emailed Vince at iforged he said 10.5" are ok i know his a cool guy but im not sure 10" or 10.5"?

[James325]

Yes he is a top guy vince..He assured me with the offsets they use for the M3 i wont have any rubbing issues with the 10.5 rears but im going with 275 tyres, from what i have been told by Sam at Rennsport the 285 tyre on a 10.5 rear will definatly rub ive been down the rolling wheel arch road with my convertible don't really fancy doin it again ;)Digs dont put 20s on your car mate that red vert looks silly with 20s but thats just my opinion Ray i would opt for the 9" front mate i put my HREs on the M3 with a 8.5 front 235/35/19 and it didnt fill the arch thats why i'm going with the 9" front

[444bhp Ray]

Yes he is a top guy vince..He assured me with the offsets they use for the M3 i wont have any rubbing issues with the 10.5 rears but im going with 275 tyres, from what i have been told by Sam at Rennsport the 285 tyre on a 10.5 rear will definatly rub ive been down the rolling wheel arch road with my convertible don't really fancy doin it again ;)Digs dont put 20s on your car mate that red vert looks silly with 20s but thats just my opinion Ray i would opt for the 9" front mate i put my HREs on the M3 with a 8.5 front 235/35/19 and it didnt fill the arch thats why i'm going with the 9" front

is that a problem rolling the rear arch and how much would that cost? [hmm
just thought Vince told me 10.5 at the rear with 285x30x19 is ok [hmm

[James325]

Its not a problem getting your arches rolled at all its just a bit of a messing about for me as there is no-one where i live that does it so i had to travel 60miles to get it done cost me £80 but tbh if vince says they wont be any problem i cant see there being one its all down to the offsets

[444bhp Ray]

Its not a problem getting your arches rolled at all its just a bit of a messing about for me as there is no-one where i live that does it so i had to travel 60miles to get it done cost me £80 but tbh if vince says they wont be any problem i cant see there being one its all down to the offsets

do you know what the right offset would be for what i want?

[peppernick]

You guys are having fun with the new smilies [ok

For me, I like the classic lines and motorsport background of BBS ;)

http://img.photobucket.com/albums/v392/peppernick/3.bmp

http://img27.imageshack.us/img27/3364/DSC04875.jpg

[444bhp Ray]

You guys are having fun with the new smilies [ok

For me, I like the classic lines and motorsport background of BBS ;)

http://img.photobucket.com/albums/v392/peppernick/3.bmp

http://img27.imageshack.us/img27/3364/DSC04875.jpg

I like BBS wheels LMs,did see some for sale across the water USA but most the time the guys seem to not want to ship,i think its to much hassle & i would be up all night wondering if im getting my bits? some times you just dont know.I think most of us on these site are trust worthy [ok at home & across the water [hiya ,any way i thought i would go for Iforged & save some money ;) for some mods off Teddy [ok Ray

[James325]

Naa BBS dont rock my boat they look ok on non Ms but on Ms i prefare a wheel with a nice deep dish ;)

[rossi46]

Naa BBS dont rock my boat they look ok on non Ms but on Ms i prefare a wheel with a nice deep dish ;)
the one on the red M3 has a nice deep dish, i prefer the look on those then the iforged IMO.

[444bhp Ray]

What ye gone for Ray? ;)

Hi James just want to let you know spoke to Vice today deal all done swifts 9x19 front 10.5x19 rear he was saying no need to roll the arch,because most the width is in side near the shock,i did ask time & time again will the wheels stick out he said "no we have done this size lots of times" :)was going 8.5 on the front 10.5 at the rear but the wall size wont be the same,thats why its 9" at the front. Ray

[Phil_D]

Gota love those BBS rims on that Red M

[444bhp Ray]

Yes he is a top guy vince..He assured me with the offsets they use for the M3 i wont have any rubbing issues with the 10.5 rears but im going with 275 tyres, from what i have been told by Sam at Rennsport the 285 tyre on a 10.5 rear will definatly rub ive been down the rolling wheel arch road with my convertible don't really fancy doin it again ;)Digs dont put 20s on your car mate that red vert looks silly with 20s but thats just my opinion Ray i would opt for the 9" front mate i put my HREs on the M3 with a 8.5 front 235/35/19 and it didnt fill the arch thats why i'm going with the 9" front

Jamie just want to say thanks on advice for wheel size, by the way like to see some pics of your car mate,if poss? Ray. [ok

[James325]

Hi Ray,Vince advised me to go with 8.5 fronts as i lowered on KW V2s and he said the wheel has a chance of hitting the collar :( so ive gone 8.5 front 10.5 rears but i will still put the 245 tyre on a 8.5 rim np ile post some pics shortly ray

[Afif]

hmmm if i got my arches rolled you reckon i could get rear M3 19's on?

[444bhp Ray]

Hi Ray,Vince advised me to go with 8.5 fronts as i lowered on KW V2s and he said the wheel has a chance of hitting the collar :( so ive gone 8.5 front 10.5 rears but i will still put the 245 tyre on a 8.5 rim np ile post some pics shortly ray

Be nice to see mate [cool,been looking at some of your threads see you have ss Exhaust.Nice one Ive got ss middle pipe as well,ACS rear box,but want ss light weight rear. Need to rob a Bank i think? may be get some of us together for that one [bang, not sure about shocks yet for my car [read

[444bhp Ray]

hmmm if i got my arches rolled you reckon i could get rear M3 19's on?

I dont think so the offset on the rear i think is too much,i think? you could get 4 front M3 wheels on 95% sure :)

[James325]

hmmm if i got my arches rolled you reckon i could get rear M3 19's on?

No chance mate not unless you got 4 fronts ;)

[James325]

Be nice to see mate [cool,been looking at some of your threads see you have ss Exhaust.Nice one Ive got ss middle pipe as well,ACS rear box,but want ss light weight rear. Need to rob a Bank i think? may be get some of us together for that one [bang, not sure about shocks yet for my car [read

Ray the SS system is unbelievable.. the sound is to die for, from what ive been told its the 100 cel racing cats that do the buisness on the system which i can vowch for...The SS lightwieght is on order mate should be with me within the week :D :D :D

[444bhp Ray]

Ray the SS system is unbelievable.. the sound is to die for, from what ive been told its the 100 cel racing cats that do the buisness on the system which i can vowch for...The SS lightwieght is on order mate should be with me within the week :D :D :D

Jamie can i ask where you are getting it from,might be able to help. By the way how much are you paying,if i might ask? [read

[Afif]

damn. I got 2 rears and a front M3 19's.... the guy who was supposed to hook me up with another front so i could sell the set came up with a replica [fight. So just thinking of what to do with em [hmm.

[Har5ha]

I want rims!!!!

[444bhp Ray]

damn. I got 2 rears and a front M3 19's.... the guy who was supposed to hook me up with another front so i could sell the set came up with a replica [fight. So just thinking of what to do with em [hmm.

How about put them on Ebay, you never know could end up making money on there, stranger things have happened [situp

[Afif]

hmmmmmmmmmmmmmm im not going to the hassle of shipping them so chances are i wont get much for them. Might give it a try. Wonder how much their worth [hmm.

[James325]

Ray i got it from Joe @ HTR as for price it was £1195

Ring Joe he will endevour to help you

08700 80 81 82

Sound Guy

[444bhp Ray]

Ray i got it from Joe @ HTR as for price it was £1195

Ring Joe he will endevour to help you

08700 80 81 82

Sound Guy


CAN GET CHEAPER [read

[BigFas]

Holy smiley overkill batman

[James325]

CAN GET CHEAPER [read


Pray tell Ray gimme some bad news why dont ye how much..

[444bhp Ray]

Pray tell Ray gimme some bad news why dont ye how much..

Soory for the bad news mate. no smilies

[James325]

arrrr well its only money [bang