PDA

View Full Version : 19 question again!



Silver
30-11-2004, 07:25 PM
Will these fit 19"x10, 5x120 bolt pattern with a +38 offset wit 19/30/265 at the rear? On a standard Coupe lower on H&R race springs? :confused:

James325
30-11-2004, 07:59 PM
With a +38 OFFSET you will be on the limit i would even go as far as to say you wont get them on, i had HREs on my convertible with a rear OFFSET of +37, wheels were 19x9 and i had my arches rolled and i still had slight rubbing issues with the 265/30/19 tyre. I was lowered on the eibach pro-kit and ended up putting the standard springs back on the rear due to rubbing even after rollling

Hope this helps

Afif
30-11-2004, 08:02 PM
i have no idea what offset is :o.

Silver
30-11-2004, 08:06 PM
offset determines the postion of the wheel. for example the lowers the offset number the further out the wheel sits. Hope dis hope helps well it wat i been told :)

Silver
30-11-2004, 08:08 PM
where did u get ur arches rolled???

Phil_D
30-11-2004, 08:34 PM
Deffo need arches rolled to get those fitting

James325
30-11-2004, 08:56 PM
Storm motorsport in Bradford.... i would seriously check that Offset out before you buy these wheels mate ;)

Silver
01-12-2004, 11:41 PM
tanxs 4 da advice ppl...well let u knw how i get on..hopefully have the rims nxt year :cool:

Afif
04-12-2004, 09:54 PM
i just got some M3 wheels 19 inch (well 3 of them .... getting 4th one on monday) . Ill just check the offsets. Need to know if they fit on mine :D

Afif
04-12-2004, 10:04 PM
Genuine BMW M3 ones :D.

Front 8Jx19 Offset 38
Back 9.5Jx19 Offset 44

will fit my beemer right without any rubbing?

Silver
04-12-2004, 10:25 PM
OK M3 arches are much wider than standard coupe and saloons. Was told u have to roll the arches to have 19/10 wit at the rear, and downside is no high speed turns or cornering otherwise the wheels will rub. tats wat i been told. this only for coupes and saloon advice only. not for cab.

Afif
04-12-2004, 10:27 PM
well im only going to have 225/255 tyres on them not 235/265 plus its 9.5 on the back not 10 so hopefully ill be ok :D.

Phil_D
05-12-2004, 10:08 AM
The fronts will be fine but i am almost 100% sure that the rears will not fit the offset is too agressive and the rears are too wide , i am running 19 x 9 ET40 and these just fit the rear of my coupe without any mods (remember coupr has more room to play with on the rear over the sedan)..... See if you can get them on but i think they will be too big... If you were to go for 4 fronts they should fit without any rubbing

Afif
05-12-2004, 11:27 AM
how does the 'J' affect the wheel?