PDA

View Full Version : CSL's


MistaSmiff
18-07-2005, 09:08 PM
If I order the CSL's off you will they fit exactly like this on my 325 , i.e, nice deep dish on the back ??[hmm :rolleyes: [hmm
http://forum.evotechnik.net/attachment.php?attachmentid=1704&stc=1
AJ.
18-07-2005, 09:33 PM
DAMN!!!! My car looks shinny!!
MistaSmiff
18-07-2005, 09:41 PM
DAMN!!!! My car looks shinny!! no, thats my photoshop skillz .. ;)
Raj
19-07-2005, 03:14 PM
If you go with staggered sizes then yep. Teddy's are dished rears.
Durgesh
31-07-2005, 12:21 PM
They are not going to be dished as far as I know.

You need to put them on an M3 to do that, as the ofset is different.

Basically you will get two sets of fronts.

But wait for Teddy to confirm this...

Durgesh
lee330sport
31-07-2005, 12:26 PM
No, the reps now have the dished look at the rear in 9.5j for non M models. I think Teddy and velocity have the dish.
Durgesh
31-07-2005, 12:27 PM
I stand corrected. [bang

Durgesh
MistaSmiff
31-07-2005, 01:22 PM
Yep...I've been talking to Velocity and they deffo have a dish but it still won't be as pronounced as original CSL's becasue they are only 9.5....
peppernick
31-07-2005, 03:30 PM
The dish effect on Velocity

http://www3.telus.net/bobo83/bobo22.jpg
adood84
31-07-2005, 05:36 PM
Nick , If the wheel is 18x 8.5 at the front and 18x 9.5 with offset 40+ would they fit my car with out any moddifing ? as My current wheels have the same width front and back ? and what tires would fit those wheels?
peppernick
31-07-2005, 06:15 PM
265/35/18. Don't think you need arch rolling on your ACS springs but not 100% sure.
mysticm3
01-08-2005, 12:10 PM
the wheels we do are dished 8.5 front and 9.5 rear. The ones fitted to that red E46 have shadow titanium finish. I believe Velocity and me are getting the wheels from the same source but they are in the US.
MistaSmiff
01-08-2005, 12:24 PM
the wheels we do are dished 8.5 front and 9.5 rear. The ones fitted to that red E46 have shadow titanium finish. I believe Velocity and me are getting the wheels from the same source but they are in the US.So why can't you get silver finish ones then ?? :(
mysticm3
01-08-2005, 02:00 PM
factory only make certain amount of wheels per production run, once they are gone they'll wait for enough order to start another production run. At the moment there isn't enough order for them to start making them again.
adood84
02-08-2005, 07:14 AM
whats is arch rolloing and what does it involve?
Raj
02-08-2005, 07:58 AM
whats is arch rolloing and what does it involve?

If you run your fingers along the wheel arch, you can feel the metal from the arch that has been bent underneath (this is where the tyre rubs). Arch rolling is when the metal you can feel under the arch is bent (rolled) all the way back on itself giving an extra bit of space for the tyre to manouvre in without rubbing.
mysticm3
03-08-2005, 02:01 PM
if you roll your arches make sure they also give it a rust prevention treatment afterwards.