19" e46 M3 iforged wheels offset?

[sparkyunlimited]

Hi all,

Does anyone know what the offset on a set of the above would be?

the rim sizes are apparently 8.5x19 and 10x19

I have just bought them and am wondering whether i will still need the spacers i have on my standard 19's or if the iforged will already have the aggressive offset i want.

Cheers

Dave

[Moe]

you cant tell from the sizes you posted you need to post the ofsets for people to tell you if you need spacers or not

[sparkyunlimited]

the initial question was "what are the offsets likely to be"

the whole problem is that I don't know what they are.

if i find out what the offset is likely to be, i can figure out how far off the maximum offset they are and judge the spacer situation

thanks
dave

[Moe]

Sorry i didnt read the question properly maybe ask styler he has 19x10 on the back i think

[sparkyunlimited]

hopefully he will come online and help me out.
not due to pick them up until a week saturday.

[Adil]

arnt the off sets written on the inside of the wheel? shud be there

[imu]

On a rear 10 inch width wheel for an E46 M3, you'd want no more aggressive an offset than about ET20 ish i'd say...

The seller should be able to tell you the offsets surely?

[peppernick]

If they are made for the E46 M3 (Iforged rims are all custom made), then they are likely to be ET35 afronts nd ET25 rears.

Offset is also dependant on size of the protruding lip.

[sparkyunlimited]

guess i could do with some 5-7mm spacers to fill the back arches then, might as well make use of the rolled arches!

can't remember what size the spacers i have already are, think they are 12mm and 15mm!

cheers
Dave